Array Scanning and Analysis

Ensure the slide(s) is washed sufficiently with Wash Buffer I and II and then completely dried as described in the protocol. If the slide(s) has any remaining debris, gently spray with distilled or deionized water prior to drying and then insert into the polypropylene 30ml conical centrifuge tube (or the Slide Washer/Dryer tube) provided with the kit. Refrain from touching the slide surface, holding the slide by the edges only. Securely fasten the cap and wrap the entire tube with aluminum foil to protect it from light. The centrifuge tube can be stored at room temperature or 4°C before shipment.

Note: The fluorescent dye used is fairly resistant to photo-bleaching but it is still recommended that the slides are handled with care and kept away from direct exposure to heat or light.

Note: Permanent marker ink can significantly interfere with fluorescent signal detection. We recommend marking only the back side of your slides with a green or blue ultra-fine point Sharpie® brand marker. Please see your product manual for detailed instructions.

Please complete and submit the Array Scanning and Analysis Form (including payment information) with the shipment. Please also email our service department at service@raybiotech.com with your courier tracking number once shipped so we can monitor the incoming delivery.

For international shipments, please confirm all necessary customs paperwork that may be necessary. Contact your distributor if you need assistance.

1. Scanning Service: The slide(s) is scanned and the .TIFF image file is sent to the customer via email or drop-box (if necessary).*
2. Scanning and Data Extraction Service: The slide(s) is scanned, data extraction is performed, and the raw OD data is sent back via email. (Excel file).
3. Scanning and Analysis Service: The slide(s) is scanned, data extraction is performed, and the data is analyzed by the appropriate RayBio® Analysis Tool (Excel file). This file is then sent back via email along with a copy of the image (PowerPoint file)*.

*Only low resolution images are available for Quantibody arrays.

• Scanning Service: 5-10 business days* from receipt of slide(s) and completed Service Form.
• Scanning and Data Extraction Service: 5-10 business days* from receipt of slide(s) and completed Service Form.
• Scanning and Analysis Service: 5-10 business days* from receipt of slide(s) and completed Service Form.

*Only an approximation and may vary based on number of slides and current service order volumes. Please contact us if you need a current estimation or a status update of any ongoing service.

It is strongly recommended that slides are shipped between Monday and Wednesday in case there is a delay in shipping to ensure they are received during normal operating business days. Please contact us for questions about holiday business hours.

Please send your slide(s) priority overnight and on blue ice packs (4ºC) to:
Raybiotech Inc.
Attn: Service Department
3607 Parkway Lane, Suite 200
Peachtree Corners, GA 30092